Bundle of 3 units
There are two ways to do the wiring between the test fixture and a YAVPack:
- DIRECT WIRING: For software debugging, test of prototypes or for single use fixture, the user can connect patchcords from the receiver modules in the YAVPack to the pin plate in the fixture. This solution is low cost and quick.
- ITA FRAME: When you plan to use several probe plates (Bed of needles) with the same YAVPack, using the YAVPack ITA frame, enables the user to plug/unplug all the connections at the same time and the probe plate change operation can be done easily and without risk (strain relief available with the ITA frame).