Productos . YAV Modules . Miscellaneous .

YAV90090 Ethernet to CAN Gateway


The YAV90090 module, allows the exchange of CAN messages between CAN systems via TCP/IP, using existing Ethernet infrastructures.
Thanks to the Gateway, the user can control the 6TL modules (which feature CAN bus communication), through TCP/IP from a PC.
CAN frames are wrapped in TCP or UDP message packets and then forwarded via the IP network.
The YAV90090 Gateway provides one LAN connection and one High-speed CAN interface. The module is suitable for use in an industrial environment.
The YAV90090 Gateway module is configured via easy accessible dip switches.


• High-performance Arm Cortex-M3 MCU with 512 Kbytes Flash, 120 MHz CPU, ART Accelerator, Ethernet P/N STM32F207IEH6
• USB 2.0 connector for serial data transfer (reserved for factory use)
• Connections for CAN, and power supply via 4-pole Weidmüller connector
• Reboot and reset of the device to factory defaults with a reset button
• Plastic casing for benchtop operation
• LEDs for device status and power supply
• Voltage supply from 8 to 30 V

LAN properties
• Data transmission using TCP or UDP
• Single Port Ethernet Physical Layer Transceiver P/N DP83848CVV
• 10/100 Mbit/s bit rate
• RJ-45 connector with status LEDs

CAN properties:
• One High-speed CAN channel
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Infineon TLE6250GV3CAN transceiver
• Compatible with 6TL modules CAN interface

Download de archivos

Para poder descargar la siguiente documentación debe identificarse

Para poder descargar la siguiente documentación debe identificarse Ethernet to CAN Gateway


Carrer del Solsonès, 87,
08211 Castellar del Vallès,
Barcelona, España

+34 937 270 074
S.A. Sistel · C. Solsones, 87-89, Pol. Ind. Pla de La Bruguera, 08211 Castellar del Valles · Contacto · Sitemap · Nota legal · CIF: A08768434
Tel. +34 937 270 074 · Fax +34 937 253 576 · www.6tlengineering.com · info@sasistel.es

Plataformas Base para Test YAV Modules 6TL FastATE Modules YAV Packs Software Formación