6TL


Productos . Plataformas Base para Test . Plataformas Base IN-LINE .

Productos


H71003110

6TL-31 Plataforma test In-Line

• Handling time for each module<3,5s
• Lean manufacturing footprint
• SMEMA synchronization for OK/NOTOK and DUT OK signal at output transport lines.
• Allows the use of dual well test fixtures in each station, able to execute simultaneously two test processes in every station (For example: on board programming in the first DUT and functional test in the second one), improving the test troughput.
• PCB servo pusher & servo-lifter controlled by a servomotor, for PCB contacting, with 3 test position levels, for different lengths of test probes (Hipot, Functional and ICT tests).
• VPC 9025 Receiver, 25 slots
• Enough free space for additional 19” instruments in front and back side of the platform.
• Teleservice by fixed IP Ethernet connection.
• WxDxH: 765x1300x1600mm
• 17U free rack space


The 6tl-31 in-line handler is based on a compact and truly modular design; its flexibility allows meeting the demands of the products to test with the best scalability.

The 6TL-31's standard 19” format allows the installation of standard instrumentation in both the front and rear sides of the stations. Each station has the following common elements:

• Power Management and Operator Interface Unit (MMI), P/N H71000700. Integrates all the power management functions and includes an act...

MÁS INFORMACÍÓN





H71003310

6TL-33 FastATE Handler

- Ideal for combinational test: ICT + FCT
- High accuracy multi-stage servo-controlled Press system up to 3.000N
- Multi-station operation: Bypass conveyor.
- Small footprint: Reduced dimensions in production lines
- Automatic conveyor width setting
- FastATE technology: CAN bus controlled devices: Minimum wiring and easy maintenance
- ICT, FT, Boundary Scan, ISP, RF (Anechoic chamber), vision… capabilities
- MMI with power and temperatures control with safety relays
- Tall components allowed: Up to 100mm in top side and 35 mm in bottom side
- Option of Return conveyor for transport pallet return
- 25-Modules High quality mass interconnect receiver VPC 9025 TR
- Automatic pneumatic fixture locking
- Fixture exchange time < 2 min
- Fixtures and software automatic ID check and spring probes cycles counter
- Fixture compatibility with bench top 6TL platforms for fixture debugging
- Fully expandable for quick adaption to new production requirements
- Fixtures: Capability to carry linear or rotary actuators and physical measurements


The 6TL-33 is a top class servo controlled test handler, scalable and modular, following the FastATE® technology.

The 6TL-33 features a robust mechanical press system, based on four spindles and sliding columns, which is driven by a digitally controlled servomotor. The fixture bay is moving up to complete the contacting procedure. When this movement is complete, and the DUT is touching the test probes, a bypass conveyor will enable a free way so that other DUTs can be tested in other 6TL3...

MÁS INFORMACÍÓN





H71003400

6TL-34 Fast ATE Handler

- High accuracy multi-stage servo-controlled Press system up to 3.000N
- Automatic conveyor width setting
- FastATE technology: CAN bus controlled devices: Minimum wiring and easy maintenance
- MMI with power and temperatures control with safety relays
- Tall components allowed: Up to 100mm in top side and 35 mm in bottom side
- 8-Modules High quality mass interconnect receiver
- Automatic pneumatic fixture locking
- Fixture exchange time < 1 min
- Fixtures and software automatic ID check and spring probes cycles counter
- Fully expandable for quick adaption to new production requirements
- Fixtures: Low cost Fixture kits


The 6TL-34 is a top class servo controlled test handler, with modular control concept, following the FastATE® technology.

The 6TL-34 features a robust mechanical press system, based on four spindles and sliding columns, which is driven by a digitally controlled servomotor.

The 6TL-34 handler is prepared for high dimensión DUTs, up to 455 x 600mm.

Main Features:
· Dimensions: 1122 x 1750 x 1638 mm
· Power: 1200VA (190..265VAC)
· Compressed air: 6 bar
· Weig...

MÁS INFORMACÍÓN





H7100350S

6TL-35 FastATE Handler for big area PCBs

- Ideal for test of BIG AREA PCBs.
- ICT or FCT
- High accuracy multi-stage servo-controlled Press system up to 2.500N
- Multi-station operation: Bypass conveyor.
- Reduced dimensions for production automation thanks to bypass conveyor
- Automatic conveyor width setting
- FastATE technology: CAN bus controlled devices: Minimum wiring and easy maintenance
- ICT, FT, Boundary Scan, ISP, vision… capabilities
- MMI with power and temperatures control with safety relays
- Tall components allowed: Up to 100mm in top side and 35 mm in bottom side
- Option of Return conveyor for transport pallet return
- 25-Modules High quality mass interconnect receiver VPC 9025 TR
- Automatic pneumatic fixture locking
- Fixture exchange time < 2 min
- Fixtures and software automatic ID check and spring probes cycles counter
- Fully expandable for quick adaption to new production requirements
- Fixtures: Capability to carry linear or rotary actuators and physical measurements


The 6TL-33 is a top class servo controlled test handler, with modular control concept, following the FastATE® technology.

The 6TL-35 features a robust mechanical press system, based on four spindles and sliding columns, which is driven by a digitally controlled servomotor.

A testing line based on 6TL-35 handlers, can be configured with a combination of single stations and multi-stations, depending on the customer layout and/or production volume....

MÁS INFORMACÍÓN






info@sasistel.es

Carrer del Solsonès, 87,
08211 Castellar del Vallès,
Barcelona, España

+34 937 270 074
S.A. Sistel · C. Solsones, 87-89, Pol. Ind. Pla de La Bruguera, 08211 Castellar del Valles · Contacto · Sitemap · Nota legal · CIF: A08768434
Tel. +34 937 270 074 · Fax +34 937 253 576 · www.6tlengineering.com · info@sasistel.es

Plataformas Base para Test YAV Modules 6TL FastATE Modules YAV Packs Software Formación