6TL


Productos . 6TL FastATE Modules . Control, Monitor, Security & Power Mgment for ATEs .

Productos


H73000301

Power management & MMI module Lite version

- 2U height x 305mm depth
- 24Vdc 8A Power Supply
- 230Vac 15A Contactors
- AC Current & Power Factor measurement
- 2x Temp. Measurement
- Cooling fans control
- 2x M12 I/O's connector
- External Stop and RST
- 5x CAN bus ports
- 1x LAN Ethernet
- 1x RS485
- 1x USB
- 1x Safety Relay x2 Outputs
- Alarm buzzer


This module, named “6TL-MMI Lite version”, is designed to be the interface between an operator and a SYSTEM as well as being a metered power distribution unit (PDU) for it. The module is providing also safety controls, data bus interfaces, temperature control and timers.

The 6TL-MMI is suitable for any ATE, and specially for those based on CAN bus controlled devices, because in addition to the above functionalities, this module is also providing galvanic isolation up to 1500V for the CAN...

MÁS INFORMACÍÓN





H73000700

Power Management & MMI module

• Standard 19” rack
• Universal AC input 24VDC8A power supply with intelligent temperature control
• Platform Safety Management meeting EN 60947-5-1, EN 60204 and VDE 0113-1 requirements.
• Microcontroller with RTOS
• Local and remote temperature measurement with standard Pt100 sensors
• Platform temperature control with controlled fans.
• 1x DB-9 connector CAN bus port for direct connection to NI CAN interfaces
• 4x Four-pole terminal blocks as CAN bus control ports (with 1500V galvanic iso-lation) for Plug&Play CAN bus devices (Light tower, switching, etc.) with moni-tored protection and switchable 24VDC power supply output.
• Mains switch and current breaker switches (external reset operation) (Power and control).
• >1% precision AC metered voltage, current, phase and frequency
• 320x240 full colour LCD graphic display with standard colours code
• Local and remote test cycle control, for Start & Terminate execution
• Run time/Down time counter with non-volatile, non-erasable memory
• 8 floating bipolar switches for enabling control of external devices (High voltage power supplies, mechanical devices, servo-actuated devices,…etc)
• Emergency stop button (local and/or remote) according with ISO 13850 with M12 connector.
• Connectors for direct control of safety light courtain, with automatic self test and reset.
• Two options: European or NEMA plugs for unswitched loads (UPS and Process Controller)
• Pluggable terminal block for switched loads PDU. “Green option”: Selective switch per instrument for energy saving
• 90dB Alarm buzzer
• USB port for PC link and/or software updating
• Ethernet port for LXI network
• Port RS485 multi-drop for external devices control
• Standard NI CAN bus port for computer interface
• 2x M12 I/O connectors with 2 configurable I/O’s and switchable +24V power out-put
• Connector input for Safety Magnetic Switch (Class 3)


This module, named “6TL-MMI”, is designed to be the interface between an operator and a SYSTEM as well as being a metered power distribution unit (PDU) for it. The module is providing also safety controls, data bus interfaces, temperature control and timers.

The 6TL-MMI is suitable for any ATE, and specially for those based on CAN bus controlled devices, because in addition to the above functionalities, this module is also providing galvanic isolation up to 1500V for the CAN bus. This is...

MÁS INFORMACÍÓN





H730008xS

Módulo distribuido para alimentaciones Conmutado, CAN

• Controlled start up of test systems
• 70 A maximum total current to distribute (Power IN/OUT Connectors)
• Different socket types (Standards depending on country area)
• Standard 19” rack 2UA
• 8 or 4 sockets (depending on plug type), 240Vac
• Power up cable included (for connection from MMI)


The intelligent Power Distribution Unit (PDU) H7300.08xx has two main functions:
• Distributing the power to each device in a system
• Switching on the devices sequentially, in order to minimize the inrush current from the switched power supplies, that might affect the contactors.

The PDU has electrical monitoring of the load status in order to ease troubleshooting and maintenance tasks:
• There are two light indicators per socket, to inform the user about:
o Whether the plugg...

MÁS INFORMACÍÓN





H73000900

Power Supply 510W 5V40/2x12V20/24V3 19" CAN bus

with VPC iCON connectors.
Outputs:
5V/40A; 2x12V/20A; 24V/3A
I sense and V trim.




MÁS INFORMACÍÓN





H78001000

Indicador de estado de máquina CAN bus

• Indicación del estado de la plataforma en elementos desmontables de 70 mm de diáme-tro de alta luminosidad
• Fijación magnética: No necesita taladros ni tornillos
• Control CAN bus “Plug & Play”
• Opción de señal acústica (106 dB’s)




MÁS INFORMACÍÓN






info@sasistel.es

Carrer del Solsonès, 87,
08211 Castellar del Vallès,
Barcelona, España

+34 937 270 074
S.A. Sistel · C. Solsones, 87-89, Pol. Ind. Pla de La Bruguera, 08211 Castellar del Valles · Contacto · Sitemap · Nota legal · CIF: A08768434
Tel. +34 937 270 074 · Fax +34 937 253 576 · www.6tlengineering.com · info@sasistel.es

Plataformas Base para Test YAV Modules 6TL FastATE Modules YAV Packs Software Formación